Alarm Relay Reset; Alarm Relay State; Alarm Relay Threshold; Ext. Input Threshold (Atlas) - ADTRAN ATLAS 800 SERIES System Manual

Atlas 800 series
Hide thumbs Also See for ATLAS 800 SERIES:
Table of Contents

Advertisement

ATLAS 800 Series System Manual
Call Stagger
Submenus
No Stagger
500 ms
1 sec
2 sec

Alarm Relay Reset

Write security: 3; Read security: 5
Clears the Alarm Relay located on the rear panel of the ATLAS 890. Activating the software Alarm Relay
Reset functions the same as manually pressing the ACO Switch located on the ATLAS 890 front panel.

Alarm Relay State

Write security: 3; Read security: 5
Configures the alarm relay response during an active alarm. The following sections are available:
Energized
De-Energized

Alarm Relay Threshold

Write security: 3; Read security: 5
Defines the event log category for the message associated with the alarm. For more details on Event Log
categories refer to System Event Log on page 353.
Ext. Input Threshold (ATLAS 890)
Write security: 3; Read security: 5
Defines the alarm level and text for external switch contacts. If the external switch contact is closed, the
alarm is thrown and the event text is sent to the event log.
Name
Description
61200780L1-1C
Specifies the amount of delay between placing calls for outgoing BONDING
sessions. The following call stagger values are available:
Description
There is no delay between the call dialing of a BONDING session.
Wait approximately ½ second between the call dialing of a BONDING session.
Wait approximately 1 second between the call dialing of a BONDING session.
Wait approximately 2 seconds between the call dialing of a BONDING session.
In an alarm condition, the Normally Open (NO) relay is closed and the
Normally Closed (NC) relay is opened.
In an alarm condition, the NO relay is opened and the NC relay is closed.
Read security: 5
Displays the name External Input to identify the entry for the external input
alarm.
Write security: 3; Read security: 5
Contains the user-defined text that will be sent to the ATLAS 800 Series event
log when the alarm is triggered.
© 2004 ADTRAN, Inc.
System Config Menu Descriptions
Alarm Relay Reset
92

Advertisement

Table of Contents
loading

This manual is also suitable for:

Atlas 830Atlas 890

Table of Contents