ADTRAN ATLAS 800 SERIES System Manual page 274

ATLAS 800 Series System Manual
Out#Rej
Submenus
Reject Number
Data 64K, Data 56K,
Audio, Speech
Ifce Config
Subst Templ
Submenu
Original#
61200780L1-1C
The following O #R
UT EJ
that ATLAS 800 Series will not send to the network.
Description
Identifies which numbers this endpoint will not pass on toward the network. Use
when the outgoing call filter is different for different users sharing this endpoint.
The wildcards are identical as in
rejects all long distance calls, but only for this
[0,1]-$
permitted in the N
ETWORK
distance numbers while other users could.
Rejects outgoing calls based on call type. For example, setting the reject number
to $, Digital 56/64 to E
NABLED
digital calls while not rejecting analog calls. This list may remain blank if the
accept list meets desired filtering.
Specifies the configuration parameters for the endpoint.The selections displayed
in this field are based on the type of module selected in the
For detailed information on submenus for a particular module type, please refer
to the dial plan interface configuration menu discussion for the appropriate
network, option, or resource module.
Some of the options available in this submenu change depending on the type of
modules selected in the
these submenus, refer to the individual module interface configuration menu
discussions in this section.
The following substitution template submenus allow the ATLAS 800 Series to
select calls (based on telephone number) and substitute a user-defined number
for the received digits after the call has been processed by the switchboard.
Substitution templates are created for each entry in the Dial Plan.
Descriptions
Designates the number(s) to be the search criteria for the substitution template.
The pattern can be a specific number, or wildcards can be used as part of the
number specification.
X = Any single digit
N = Any single digit 2 through 9
$ = Any number of digits of any value
9 = This specific number
[1,2,3...] = A single digit in this group
For example, 963-812[012] would be 963-8120 to 963-8122.
© 2004 ADTRAN, Inc.
submenus define the parameters for the outgoing calls
(see
O #A
UT CCEPT
termination endpoint, this user could not dial long
, and Audio and Speech to
S /S or P /PEP
LOT VC ORT
Dial Plan
User Term
on page 268).
Out#Accept
termination. If
U
SER
D , rejects all
ISABLED
option.
S /S
LOT VC
fields. For more information on
274