Table of Contents
Advertisement
Chapter 6. Terminal Menu and System Control
SYSTEM
>
UTILITY
» Update Firmware
»» Module Slot
6-16
Use the System Utility menu to view and set the system parameters shown
in Figure 6-4.
Write security: 1; Read security: 5
Updates firmware when ATLAS 810
transfer methods are available for use in updating any modules that contain
Flash memory—including the ATLAS system controller.
The first transfer method uses the ATLAS serial Chain In port of the system
controller and XMODEM protocol. For detailed information on how to up-
date firmware using this method, see XMODEM Firmware Updates on page
10-1.
The second transfer method uses the ATLAS built-in Ethernet port of the
system controller and TFTP (Trivial File Transfer Protocol). For detailed in-
formation on how to update firmware using this method, see TFTP Firmware
Updates on page 10-4.
The available update options vary depending on whether you
select Slot 0, Slots 1 through 8, or All Modules of a Type.
Write security: 1; Read security: 5
Displays the slot you selected for firmware updating. When this option first
appears,
None Selectedý
and press
, a dialog box opens, allowing you to select Slot 0 through
Enter
Slot 8 or All Modules of a Type. (All Modules of a Type is useful if several
identical modules are installed in the ATLAS 810
PLUS
ATLAS 810
Figure 6-4. System Utility Menu
PLUS
enhancements are released. Two
displays. When you move the cursor to this field
User Manual
PLUS
).
61200266L1-1
Advertisement
Table of Contents
