Dial Plan - ADTRAN ATLAS 800 SERIES System Manual

ATLAS 800 Series System Manual

12. DIAL PLAN

The submenus set global ATLAS 800 Series switch parameters as well as individual parameters
D P
IAL LAN
for each ATLAS 800 Series port handling a switched call (see Figure 18). The individual ports are
separated into two port types: network and user. Network ports terminate a connection from the network.
User ports terminate incoming calls and, in turn, may be connected to user equipment.
In applications where two ATLAS 800 Series units are used in a point-to-point configuration, a port in the
ATLAS 800 Series at one end would act as the network (user termination), while the ATLAS 800 Series at
the opposite end would be terminating a network connection (network termination).
Network Term User Term
Slot/Svc Slot/Svc
Port/PEP Port/PEP
Sig Sig
Out#Accept In#Accept
Ifce Config Ifce Config
Subst Templ Subst Templ
61200780L1-1C
Figure 18. Dial Plan Menu
Global Param
End of Number Timeout
Country Code
Area or City Code
Nbr Complete Templates
Submenus
Automatic Routeback Rejection
Collision Response
Global Tone Type
Figure 19. Hyperlinked Dial Plan Menu Tree (Partial)
© 2004 ADTRAN, Inc.
Ifce Config - Module
T3 and T3 D&I: Network Term - Ifce Config (PRI)
T3 and T3 D&I: Network Term- Ifce Config (RBS)
T3 and T3 D&I: Network Term - Ifce Config (NFAS)
T3 and T3 D&I: User Term - Ifce Config (PRI)
T3 and T3 D&I: User Term - Ifce Config (RBS)
T3 and T3 D&I: User Term - Ifce Config (NFAS)
E1/PRA: Network Term - Ifce Config (PRA)
E1/PRA: User Term - Ifce Config (PRA)
V35Nx: User Term - Ifce Config
USSI: User Term - Ifce Config
Octal BRI/U: Network Term - Ifce Config
Octal BRI/U: User Term - Ifce Config
Octal BRI S/T: User Termination
FXS-8: User Term - Ifce Config
Async232: User Term - Ifce Config
Pkt Endpt: User Term - Ifce Config
Ckt Backup: User Term - Ifce Config
Pkt Voice: Network Term - Ifce Config
Pkt Voice: User Term - Ifce Config
Dial Plan
267