ADTRAN ATLAS 800 SERIES System Manual page 287

ATLAS 800 Series System Manual
T3 and T3 D&I: User Term - Ifce Config (PRI)
Write security: 3; Read security: 5
This menu allows the user to define option parameters for ports which emulate a PRI connection. Specifies
the configuration parameters for the endpoint.
Switch Type
First DS0
Number of DS0s
Strip MSD
Network Specific Facility
Voice and Data
61200780L1-1C
Defines the type of PRI switch that the ATLAS 800 Series emulates. If
connected to another ATLAS 800 Series, both need to be set to the same switch
type. The following options are available:
, and
DMS 100 N
ATIONAL
Defines to the ATLAS 800 Series the first DS0 for this endpoint.The
ATLAS 800 Series uses DS0s, starting with this selection, to send and receive
calls to and from the network. The outgoing calls which are allowed or
restricted over these DS0s are set by
and O #R (see
Submenus
UT EJECT
Specifies the number of DS0s ATLAS 800 Series uses for this endpoint.
Strips a selected quantity (choose from
significant digits (MSD) of a dialed number prior to being forwarded out of the
port.
For example, a network port could be set to accept all calls beginning with 9
(9$), and then with S
TRIP
network except the leading 9.
S MSD does not affect C
TRIP
MSDs that are subsequently stripped) are used as accept criterion.
Enables the sending of appropriate information to the PSTN. The default for this
option is and in this case no Network Specific Facility Information
N ,
ORMAL
Element is sent. Unless one of the services listed below is subscribed to, the
selection should remain set to
The list below indicates services that may be subscribed to from the PSTN.
These services require that specific information (such as a Network Specific
Facility Information Element) be sent to the network during call setup.
• AT&T Accunet
• AT&T Dial-It 900/Multiquest
• AT&T International-800
• AT&T SDN
• AT&T Long Distance
• AT&T Megacom 800
• AT&T Megacom
• Nortel Foreign Exchange
• Nortel InWats
© 2004 ADTRAN, Inc.
T3 and T3 D&I: User Term - Ifce Config (PRI)
AT&T 4ESS
.
ISDN
O #A
UT CCEPT
on page 274).
N , 1, 2,
ONE
MSD set to 1 , all digits would be sent toward the
A criteria. All of the digits (including the
ALL CCEPT
N .
ORMAL
Dial Plan
, L 5E , N
UCENT ORTHERN
(see on page 268)
Out#Accept
and 3 ) of the most
287