L2 Protocol (T1 Tdm Firmware) - ADTRAN Total Access 850 System Manual

Section 4 User Interface Guide
L2 P (T1 TDM F
ROTOCOL
Use the L2 protocol menu to select the L2 protocol, configure the protocol specific parameters and view
the status as shown in Figure 8. The following menus are for Total Access 850 systems using T1 TDM
firmware.
For convenience, the following heading notations identify the type of firmware and L2 protocol
configured in the Total Access 850 system:
Firmware and
RCU type. (For
example, T1 TDM,
T1 ATM, SDSL.)
116
)
IRMWARE
Figure 8. L2 Protocol (T1 TDM) Menu
L2 Protocol (T1 TDM – T1 – PPP)
© 2004 ADTRAN, Inc.
Total Access 850 System Manual
Interface type.
(For example,
T1, Ethernet,
etc.)
Configured Layer 2
protocol. (For
example, PPP, FRE,
Auto, etc.)
64203376L1-1B