Atel Client - ADTRAN ATLAS 800 SERIES System Manual

ATLAS 800 Series System Manual
Size (Bytes)
Timeout (ms)
Round Trip Min
Round Trip Avg
Round Trip Max
Tx Stats
Reset Stats
Start/Stop

ATEL Client

Write security: 5; Read security: 5
Allows a user to remotely configure ADTRAN TSUs using ADLP over the inband management channel
on a V.35 port. This feature only allows for remote sessions through the ATLAS 800 Series to the TSUs,
not vice versa.
ATEL Address
Connect
61200780L1-1C
Specifies the size in bytes of the data portion of the ping request. The default
value is 64 bytes, and the maximum size is 1024 bytes.
Specifies the time in milliseconds to wait for the ping reply before timing out.
The default timeout is 3 seconds (3000), and the maximum timeout value is 10
seconds (10,000).
Read security: 5
Displays the minimum round trip time of the ping request/reply of the current
set of pings.
Read security: 5
Displays the average round trip time of the ping request/reply of the current set
of pings.
Read security: 5
Displays the maximum round trip time of the ping request/reply of the current
set of pings.
Read security: 5
Displays the number of ping requests transmitted (n
replies received (n
RXED
).
LOST
Resets all ping statistics to zero. If the ping client is active, this menu will stop
it.
If the ping client is currently idle, this menu sends pings to the specified
address. If the ping client is active, the menu either starts or stops sending pings.
Defines the ADLP address (Unit ID) assigned to the remote unit you are trying
to connect to. The valid range is 2 to 65520.
Activator used to start an ATEL client session to the remote unit configured in
the field.
ATEL A
DDRESS
© 2004 ADTRAN, Inc.
System Utility Menu Descriptions
), and the number of ping requests that were lost (n
ATEL Client
), the number of ping
TXED
99