ADTRAN ATLAS 800 SERIES System Manual page 252

ATLAS 800 Series System Manual
Submenu
Enable
IP
UDP Ports 1 - 3
61200780L1-1C
Description
Enables this field (select either
(Default) Relays any of the following standard UDP protocols:
Standard
DHCP, TFTP, DNS, NTP (Network Time Protocol, port 123),
NBNS (NetBIOS Name Server, port 137), NBDG (Net BIOS
Datagram, port 138), and BootP.
Specifies the UDP port (1 to 65,535) in the UDP Port columns
Specified
(maximum of three per server).
Defines the IP address of the server that receives the relay packet.
Specifies the UDP ports to relay. These fields are active only when
set to .
S
PECIFIED
© 2004 ADTRAN, Inc.
or ).
S S
TANDARD PECIFIED
Router (IP)
is not used.
D
ISABLE
E is
NABLE
252