Octal Fxs Option Module - ADTRAN ATLAS 800 SERIES System Manual

ATLAS 800 Series System Manual

OCTAL FXS OPTION MODULE

The ATLAS 800 Series system controller automatically detects the presence of the Octal FXS Option
Module (P/N 1200338L1) when it is installed in the system (listed as
Octal FXS Option Module via the terminal menu, use the arrow keys to scroll to the
press <Enter> to access the module choices. The following menu tree shows the hierarchy of the menus
discussed in this section.
Info
Part Number
Serial Number
Board Revision
Info
Read security: 5
Provides information about the module part number, serial number and assembly revision.
Part Number
Serial Number
Board Revision
Status
Read security: 5
Displays the status of each of the FXS ports.
Port
Status
Status Options
Inactive
Disabled
Idle
Tip-Open
Off Hook
61200780L1-1C
Status
Port
Status
Rx ABCD
Tx ABCD
Displays the part number of the module.
Displays the serial number of the module.
Displays the assembly revision.
Indicates the port number.
Displays the call status of each voice port. This field may display the following:
Description
The port is preconfigured, but the FXS module is not present.
The FXS module is present, but the port is not mapped.
The FXS port is in an idle state for LS configurations.
The FXS port tip conductor is high impedance.
The FXS port has detected an off hook condition (loop current flowing).
© 2004 ADTRAN, Inc.
). To see the menus for the
FXS-8
Test Config
Port
Test 2W
1kHz Tone
Loopback
Octal FXS Option Module
Info
menu and
M
ODULES
Port
Port Name
Rx Gain
Tx Gain
2W Impedance
Coding Scheme
176