ADTRAN ATLAS 800 SERIES System Manual page 211

ATLAS 800 Series System Manual
Signal Status
Read security: 5
Shows the status of key DTE interface signals. An asterisk (*) indicates the presence of a signal and a
hyphen (-) indicates no signal present.
Port
DTE Signals
Submenu
DTR
DSR
RTS
DCD
RI
I/O Status
Write security: 5; Read security: 5
Displays the input/output statistics for the Async-232 ports.
Port
Tx Bytes
Rx Bytes
Overruns
PrtyErrs
FrmErrs
Rst Stats
61200780L1-1C
Operating port number.
The following signals are monitored (these options are read-only):
Description
Data terminal ready from DTE
Data set ready to DTE
Request to send from DTE
Data carrier detect to DTE
Ring indicate to DTE
Displays the port number.
Displays the number of bytes transmitted by the DTE.
Displays the number of bytes sent to the DTE.
Displays the received overrun errors from the DTE. A receiver overrun occurs
when the DTE performs data transmission too fast for the Async-232 port to
keep up, therefore causing data to be lost. An overrun may indicate the need to
turn on hardware flow control.
Displays the number of bytes received from the DTE that contained parity
errors.
Displays the number of bytes received from the DTE that contained framing
errors.
Clears the current stored I/O statistics for each port.
© 2004 ADTRAN, Inc.
Async-232 Option Module
Signal Status
211