ADTRAN ATLAS 800 SERIES System Manual page 179

ATLAS 800 Series System Manual
Config
Write security: 3; Read security: 5
All of the following configurable parameters apply to the individual FXS ports.
Port
Port Name
Rx Gain
Tx Gain
2W Impedance
Coding Scheme
61200780L1-1C
Read security: 5
Displays the port number.
Accepts any alpha-numeric name up to 15 characters long, to uniquely identify
each port on the Octal FXS Option Module.
Adjusts the (+)Gain and (-)Attenuation of the relative signal received by the
FXS. The range includes (in dB) +6 (loudest), 3, 0, -3, and -6 (softest).
Adjusts the (+) Gain and (-) Attenuation of a digital signal transmitted by the
FXS into the digital PCM stream. The range includes (in dB) +6 (loudest), +3,
0, -3, and -6 (softest).
When the digital signal is connected through the PSTN, use a setting of -3 dB.
Read security: 5
2-wire input impedance is set to 600 ohms +2.16 µF. This is a read-only field.
Read security: 5
Displays the current PCM coding scheme. Currently only µ-Law is supported.
© 2004 ADTRAN, Inc.
Octal FXS Option Module
Config
179