ADTRAN ATLAS 800 SERIES System Manual page 188

ATLAS 800 Series System Manual
Status
Read security: 5
Indicates the current status of a particular BONDING session.
Status
Options
Idle
Reserved
Negotiating
Add Channels
BONDING
Terminated
NumB Channels
Data Rate
Bonded EP
Configuration
Write security: 3; Read security: 5
All of the following configurable parameters apply to the Nx 56/64 BONDing Resource Module. In most
applications the default values will be correct.
TXINIT Timer (sec)
61200780L1-1C
Displays the current status of the BONDING session.
Description
Indicates the number of Idle BONDING resources for a particular BONDING
engine.
BONDING resources reserved for a BONDING session that is in the process of
coming up.
A single channel is connected and negotiating the BONDING call for a
particular BONDING session.
The initial BONDING negotiation was successful, and the ATLAS 800 Series is
in the process of adding channels to the BONDING session.
The remaining channels were brought up successfully, and the BONDING
session is now ready to pass data.
The BONDING session has been terminated for some reason and is in the
process of freeing BONDING resources.
Displays the number of bearer channels used in this BONDING session. When
the number is displayed in the format X/Y, Y is the number of BONDING
resources reserved for this session, and X is the number of calls belonging to
this session that are up. If just a number is displayed, then all calls are up, and
the number displayed is the number of BONDING resources in use for this
session.
Displays the data rate for this BONDING session. The number in the
parenthesis is the data rate of the individual bearer channels.
Displays the slot and port of the terminating endpoint that is using this
BONDING session.
Specifies the length of time the originating endpoint attempts to detect the
BONDING negotiation pattern from the answering endpoint before deciding the
BONDING call has failed.
© 2004 ADTRAN, Inc.
Nx 56/64 BONDing Resource Module
Status
188