Saving Changes - 3Com 9100 User Manual

Saving Changes

Do a Get When
Configuring a VLAN
There are two ways to save your changes to non-volatile storage using
the Web Interface:
Select Save Configuration from the Configuration task button, Switch
option.
This field contains a drop-down list box that allows you to select either
the primary or secondary configuration area. After you select the
configuration area, click Submit to save the changes.
For more information on the primary and secondary configuration areas,
refer to Chapter 10.
Click the Logout button.
If you attempt to log out without saving your changes, the Web
Interface prompts you to save your changes.
If you select Yes , the changes are saved to the selected configuration
area. To change the selected configuration area, you must go to the
Configuration task button, Switch option.
When configuring a VLAN using the Web Interface, prior to editing the
VLAN configuration, you must first click the
subsequent edits are applied to the correct VLAN. If you do not click the
Get button and you submit the changes, the changes will be made to the
VLAN that was previously displayed.
If you configure a VLAN and then delete it, the default VLAN is shown in
the VLAN name window, but the VLAN information contained in the
lower portion of the page is not updated. Click the Get button to update
the display.
Saving Changes
button to ensure that
get
129