Viewing DSCP to
CoS
The DSCP to CoS Summary Page contains fields for mapping DSCP
settings to traffic queues. For example, a packet with a DSCP tag value
of 3 can be assigned to queue 4.
To view the DSCP Queue:
1
Click Device > QoS > DSCP to CoS > Summary. The DSCP to
CoS Summary Page opens.
Figure 83 DSCP to CoS Summary Page
The DSCP to CoS Summary Page contains the following fields:
DSCP — Displays the incoming packet's DSCP value.
Cos — Specifies the value of CoS to which the DSCP priority is
mapped for traffic forwarding. Eight (8) CoS are supported.
2
Define the queue number in the CoS field next to the required
DSCP value.
3
Click Apply. The DSCP values are mapped to CoS values, and the
device is updated.
C
C
HAPTER 13:
ONFIGURING
Q
O
S
155
UALITY
F
ERVICE