System Temperature Output-Summit X450 Switch Only; Power Supply Temperature-Modular Switches Only - Extreme Networks ExtremeWare XOS Guide Manual

Concepts guide
Hide thumbs Also See for ExtremeWare XOS Guide:
Table of Contents

Advertisement

Status Monitoring and Statistics
The following sample output displays the current temperature and operating status of the installed
modules and power controllers:
Field Replaceable Units
------------------------------------------------
Slot-1
: 10G6X
Slot-2
: G60X
Slot-3
:
Slot-4
:
Slot-5
:
Slot-6
: G60X
Slot-7
: G60X
Slot-8
:
MSM-A
: MSM-1XL
MSM-B
: MSM-1XL
PSUCTRL-1
:
PSUCTRL-2
:
Temp Range: -10.00 (Min), 0.00-50.00 (Normal), 60.00 (Max)
The switch monitors the temperature of each component and generates a warning if the temperature
exceeds the normal operating range. If the temperature exceeds the minimum/maximum limits, the
switch shuts down the overheated module.
System Temperature Output—Summit X450 Switch Only
On a Summit X450 switch, the output includes the current temperature and operating status of the
switch and the XGM-2xn card.
The following sample output displays the current temperature and operating status of the switch:
Field Replaceable Units
------------------------------------------------
Switch
: SummitX450-24x
XGM-2xn-1
:
Temp Range: -10.00 (Min), 0.00-60.50 (Normal), 62.90 (Max)
The switch monitors its temperature and generates a warning if the temperature exceeds the normal
operating range. If the temperature exceeds the maximum limit, the
switch in an
OPERATIONAL (Overheat)
state due to overheat.
Power Supply Temperature—Modular Switches Only
To view the current temperature of the power supplies installed in a BlackDiamond 10K switch or the
BlackDiamond 8800 family of switches, use the following command:
show power {<ps_num>} {detail}
The following sample output displays the temperature information:
PowerSupply 1 information:
...
196
Temp (C)
Status
36.37
Normal
35.31
Normal
34.68
Normal
34.31
Normal
31.37
Normal
29.75
Normal
29.00
Normal
Temp (C)
Status
42.50
Normal
mode, and the
show
output indicates the
show switch
output indicates an error
temperaturee
ExtremeWare XOS 11.3 Concepts Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Extremeware xos 11.3

Table of Contents