Enabling And Disabling Tacacs+ Accounting; Tacacs+ Accounting Configuration Example - Extreme Networks ExtremeWare XOS Guide Manual

Concepts guide
Hide thumbs Also See for ExtremeWare XOS Guide:
Table of Contents

Advertisement

Security

Enabling and Disabling TACACS+ Accounting

After you configure TACACS+ accounting server information, you must enable accounting before the
switch begins transmitting the information. You must enable TACACS+ authentication for accounting
information to be generated. You can enable and disable accounting without affecting the current state
of TACACS+ authentication.
To enable TACACS+ accounting, use the following command:
enable tacacs-accounting
To disable TACACS+ accounting, use the following command:
disable tacacs-accounting

TACACS+ Accounting Configuration Example

This section provides a sample TACACS+ accounting server configuration.
The following example:
Configures the primary TACACS+ accounting server
Configures the shared secret for the primary TACACS+ accounting server
Configures the secondary TACACS+ accounting server
Configures the shared secret for the secondary TACACS+ accounting server
Enables TACACS+ accounting on the switch
All other settings use the default settings as described earlier in this section or in the ExtremeWare XOS
Command Reference Guide.
configure tacacs-accounting primary server 10.201.31.238 client-ip 10.201.31.85 vr
"VR-Default"
configure tacacs-accounting primary shared-secret purple
configure tacacs-accounting secondary server 10.201.31.235 client-ip 10.201.31.85 vr
"VR-Default"
config tacacs-accounting secondary shared-secret purple
enable tacacs-accounting
To display the TACACS+ accounting server settings, use the
command. The following is sample output from the
accounting
TACACS+: enabled
TACACS+ Authorization: enabled
TACACS+ Accounting : enabled
TACACS+ Server Connect Timeout sec: 3
Primary TACACS+ Server:
Server name
IP address
Server IP Port:
Client address:
Shared secret :
Secondary TACACS+ Server:
Server name
IP address
Server IP Port:
334
:
:
10.201.31.238
49
10.201.31.85 (VR-Default)
purple
:
:
10.201.31.235
49
or the
show tacacs
show tacacs-
command:
show tacacs
ExtremeWare XOS 11.3 Concepts Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Extremeware xos 11.3

Table of Contents