Eaps Shared Port Configuration Examples; Basic Configuration; Basic Core Configuration - Extreme Networks ExtremeWare XOS Guide Manual

1 controller and 1 partner
■
2 partners
■
A shared port cannot be configured on an EAPS master's secondary port.
●

EAPS Shared Port Configuration Examples

This section provides examples of EAPS shared port configurations.

Basic Configuration

This example, shown in Figure
common link between them.
Figure 26: EAPS shared port basic configuration
S 3
EAPS1
S 2
P
Master

Basic Core Configuration

This configuration, shown in
EAPS common links.
ExtremeWare XOS 11.3 Concepts Guide
26, is the most basic configuration; two EAPS domains with a single
S 4
S 5
Controller
link ID=1 Common
link
Partner
S
S 1
S 10
node
Figure 27, shows a core with access rings. In this topology, there are two
EAPS Shared Port Configuration Examples
S 6
S 7
EAPS2
S 8
S P
S 9
Master
node
EW_095
419