Extreme Networks ExtremeWare XOS Guide Manual page 435

Figure 36: VLANs traverse domains inside switches
S1
S2
Correct
The VLAN partition feature is deployed under the premise that the overall inter-domain topology
●
for that VLAN is loop-free. Consider the case in
spans STPDs 1, 2, and 3. Inside each domain, STP produces a loop-free topology. However, VLAN
red is still looped, because the three domains form a ring among themselves.
Figure 37: Looped VLAN topology
Domain 1
A necessary (but not sufficient) condition for a loop-free inter-domain topology is that every two
●
domains only meet at a single crossing point.
ExtremeWare XOS 11.3 Concepts Guide
S1
S2
Wrong
Figure 37, VLAN red (the only VLAN in the figure)
Domain 2
Domain 3
STP Configurations
EX_052
EX_053
435