Verifying The Ipv4 Unicast Routing Configuration; Routing Configuration Example - Extreme Networks ExtremeWare XOS Guide Manual

Verifying the IPv4 Unicast Routing Configuration

Use the command to display the current configuration of IP unicast routing for the
show iproute
switch and for each VLAN. The
includes how each route was learned.
Additional verification commands include:
—Displays the IP ARP table of the system.
●
show iparp
—Displays configuration information for one or more VLANs.
●
show ipconfig

Routing Configuration Example

Figure 61 illustrates a BlackDiamond switch that has three VLANs defined as follows:
Finance
●
All ports on slots 1 and 3 have been assigned.
■
IP address 192.207.35.1.
■
Personnel
●
Protocol-sensitive VLAN using the IP protocol.
■
All ports on slots 2 and 4 have been assigned.
■
IP address 192.207.36.1.
■
MyCompany
●
Port-based VLAN.
■
All ports on slots 1 through 4 have been assigned.
■
ExtremeWare XOS 11.3 Concepts Guide
command displays the currently configured routes and
show iproute
Verifying the IPv4 Unicast Routing Configuration
501