Extreme Networks ExtremeWare XOS Guide Manual page 188

Status Monitoring and Statistics
Table 27 describes the BlackDiamond 8800 family of switches MSM LED behavior during a diagnostic
test on the backup MSM.
Table 27: BlackDiamond 8800 family of switches MSM LED behavior during diagnostic test on
backup MSM
MSM LED
Backup ERR
ENV
Mstr/Diag
Sys/Stat
Primary ERR
ENV
Mstr/Diag
Sys/Stat
LED Behavior—Summit X450 Switch
Table 28 describes the Summit X450 switch LED behavior during a diagnostic test.
Table 28: Summit X450 switch LED behavior
LED Color
MGMT Green blinking
Amber blinking
Amber
While diagnostic tests are running, the MGMT LED blinks amber. If a diagnostic test fails, the MGMT
LED goes to solid amber. During normal operation, the MGMT LED blinks green.
188
Color Indicates
Off Depending on the situation, this state indicates:
• Diagnostic test in progress on the backup MSM.
• Diagnostic test has passed.
Off Depending on the situation, this state indicates:
• Diagnostic test in progress on the backup MSM.
• Diagnostic test has passed.
Off/Green Depending on the situation, this state indicates:
• Diagnostic test in progress on the backup MSM.
• Diagnostic test has passed.
Off/Green Diagnostic test in progress on the backup MSM.
Off/Off Diagnostic test has passed.
Amber Depending on the situation, this state indicates:
• Diagnostic test in progress on the backup MSM.
• Diagnostic test has passed.
Off Depending on the situation, this state indicates:
• Diagnostic test in progress on the backup MSM.
• Diagnostic test has passed.
Green/Off Depending on the situation, this state indicates:
• Diagnostic test in progress on the backup MSM.
• Diagnostic test has passed.
Off/Green blinking Depending on the situation, this state indicates:
• Diagnostic test in progress on the backup MSM.
• Diagnostic test has passed.
Indicates
Normal operation is occurring.
Diagnostic test in progress.
Diagnostic failure has occurred.
ExtremeWare XOS 11.3 Concepts Guide