Extreme Networks ExtremeWare XOS Guide Manual page 453

This command displays the following information:
STPD port configuration
●
STPD port mode of operation
●
STPD path cost
●
STPD priority
●
STPD state (root bridge, and so on)
●
Port role (root bridge, edge port, and so on)
●
STPD port state (forwarding, blocking, and so on)
●
Configured port link type
●
Operational port link type
●
If you have a VLAN that spans multiple STPDs, use the
display the STP configuration of the ports assigned to that specific VLAN.
The command displays the following:
●
STPD port configuration
●
STPD port mode of operation
●
STPD path cost
●
STPD priority
●
STPD state (root bridge, and so on)
●
Port role (root bridge, edge port, and so on)
●
STPD port state (forwarding, blocking, and so on)
●
Configured port link type
●
Operational port link type
●
ExtremeWare XOS 11.3 Concepts Guide
show vlan <vlan_name> stpd
Displaying STP Settings
command to
453