Extreme Networks ExtremeWare XOS Guide Manual page 354

Network Login
To configure the untagged VLAN data, do the following:
Extreme-Netlogin-Extended-VLAN = Udata
To configure the VLAN orange to be tagged or untagged based on the incoming port's traffic, do the
following:
Extreme-Netlogin-Extended-VLAN = *orange
Configuring VLAN IDs
●
The same is true of configuring the VLAN ID. The three options to use when configuring VLAN IDs
are:
—Include before the VLAN ID for a tagged VLAN
■
T
—Include before the VLAN ID for an untagged VLAN
■
U
—Include before the VLAN name for movement based on the incoming port's traffic (mimics
■
*
the behavior of VSA 209)
To configure a tagged VLAN with a VLAN ID of 229, do the following:
Extreme-Netlogin-Extended-VLAN = T229
To configure an untagged VLAN with a VLAN ID of 4091, do the following:
Extreme-Netlogin-Extended-VLAN = U4091
To configure a VLAN with a VLAN ID of 145 to be tagged or untagged based on the incoming port's
traffic, do the following:
Extreme-Netlogin-Extended-VLAN = *145
VSA 203—Extreme: Netlogin-VLAN-Name. The following describes the guidelines for VSA 203:
For untagged VLAN movement with 802.1x netlogin, you can use all current Extreme Networks
●
VLAN VSAs: VSA 203, VSA 209, and VSA 211.
To specify the VLAN name, use an ASCII string.
●
When using this VSA, you do not specify a tagged or untagged VLAN.
VSA 203 Example. The following example modifies the VSA to specify the name of the destination
VLAN. To configure VLAN purple as the destination VLAN, do the following:
Extreme: Netlogin-VLAN-Name = purple
VSA 209—Extreme: Netlogin-VLAN-ID. The following describes the guidelines for VSA 209:
For untagged VLAN movement with 802.1x netlogin, you can use all current Extreme Networks
●
VLAN VSAs: VSA 203, VSA 209, and VSA 211.
To specify the VLAN ID, use an ASCII string.
●
When using this VSA, you do not specify a tagged or untagged VLAN.
VSA 209 Example. The following example modifies the VSA to specify the VLAN ID (tag) of the
destination VLAN. To configure the VLAN with VLAN ID 234 as the destination VLAN, do the
following:
Extreme: Netlogin-VLAN-ID = 234
VSA 204—Extreme: Netlogin-URL. The following describes the guidelines for VSA 204:
To specify the URL to display after authentication, use an ASCII string.
●
354
ExtremeWare XOS 11.3 Concepts Guide