Extreme Networks ExtremeWare XOS Guide Manual page 286

Routing Policies
then {
permit;
}
}
entry deny_entry
if match any {
nlri
nlri
}
then {
deny;
}
}
Translating a route map to a policy
You may be more familiar with using route maps on other Extreme Networks switches. This example
shows the policy equivalent to an ExtremeWare route map.
ExtremeWare route map:
Route Map : rt
Entry : 10
match origin incomplete
Entry : 20
match community
Entry : 30
match med
set next-hop 10.201.23.10
set as-path 20
set as-path 30
set as-path 40
set as-path 40
Entry : 40
set local-preference 120
set weight 2
Entry : 50
match origin incomplete
match community
set dampening half-life 20 reuse-limit 1000 suppress-limit 3000 max-suppress
40
Entry : 60
match next-hop 192.168.1.5
set community add 949616660
Here is the equivalent policy:
entry entry-10
If {
origin
}
then {
permit;
}
286
{
any/8;
22.44.66.0/23 exact;
Action : permit
Action : deny
6553800
Action : permit
30
Action : permit
Action : permit
19661200
Action : permit
{
incomplete;
ExtremeWare XOS 11.3 Concepts Guide