Switch Port-Mirroring Examples - Extreme Networks ExtremeWare XOS Guide Manual

Configuring Slots and Ports on a Switch
Unconfigure a slot (for all port-based filters on that slot).
■
Any mirrored port can also be enabled for load sharing (or link aggregation); however, each
●
individual port of the load-sharing group must be explicitly configured for mirroring.
The monitor port is automatically removed from all VLANs; you cannot add it to a VLAN.
●
The mirroring filters are not confined to a single module; they can have ports that span multiple
●
modules.
You cannot use the management port at all in switch port-mirroring configurations.
●

Switch Port-Mirroring Examples

The following example removes all port-mirroring configuration from the switch:
disable mirroring
NOTE
When you change the mirroring configuration, the switch stops sending egress packets from the monitor port until
the change is complete. The ingress mirroring traffic to the monitor port and regular traffic are not affected.
The BlackDiamond 8800 Family of Switches and the Summit X450 Switch Only
The following example selects slot 3, port 4 on a modular switch as the monitor port and sends all
traffic received at slot 6, port 5 to the monitor port:
enable mirroring to port 3:4
configure mirroring add port 6:5 ingress
The following example selects slot 3, port 4 on a modular switch as the monitor port and send all traffic
sent from slot 6, port 5 to the monitor port:
enable mirroring to port 3:4
configure mirroring add port 6:5 egress
The following example selects port 4 on a standalone switch as the monitor port and sends all traffic
ingressing the VLAN red to the monitor port:
enable mirroring to port 4
configure mirroring add vlan red
The following example selects port 4 on a standalone switch as the monitor port and sends all traffic
ingressing the VLAN red on port 5 to the monitor port:
enable mirroring to port 4
configure mirroring add vlan red port 5
BlackDiamond10K Switch Only
The following example selects slot 7, port 3 as the untagged monitor port, and sends all traffic coming
into or out of a modular switch on slot 7, port 1 to the monitor port:
enable mirroring to port 7:3 untagged
configure mirroring add port 7:1
132
ExtremeWare XOS 11.3 Concepts Guide