Extreme Networks ExtremeWare XOS Guide Manual page 175

Displaying System Power Data
Additionally, you can view the distribution of power, as well as currently required and allocated power,
on the entire switch including the power supplies by using the following command:
show power budget
Following is sample output from this command:
PS State
---------------------------------------------------------------------------
1 Powered On
2 Powered On
3 Empty
4 Empty
5 Empty
6 Empty
---------------------------------------------------------------------------
Power Available:
Redundant (N+1) Power Available:
Slots Type
---------------------------------------------------------------------------
Slot-1
Slot-2
Slot-3 G48P
Inline Power (budgeted + 2% loss)
Slot-4 G48P
Slot-5 G8X
Slot-6 G48T
Slot-7 G48P
Inline Power (budgeted + 2% loss)
Slot-8
Slot-9
Slot-10
MSM-A MSM-G8X
MSM-B
FanTray
---------------------------------------------------------------------------
Power Required:
Power Allocated:
Power Surplus:
Redundant Power Supply(s) Present?: yes
The term 2% loss shown in this display is the 2% associated with powering PDs. For example, when
you reserve 50 W for a particular slot, the system reserves 51 W.
NOTE
Refer to the ExtremeWare XOS Command Reference Guide for more detailed explanation of the
display.
budget
ExtremeWare XOS 11.3 Concepts Guide
Watts
1152.00
1152.00
2304.00
1200.00
State Watts
Empty
Empty
Operational 111.00
51.00
Empty
Operational 0.00
Operational 0.00
Operational 111.00
51.00
Empty
Empty
Empty
Operational 151.00
Empty 151.00
Operational 55.00
681.00
681.00
1623.00
Displaying PoE Settings and Statistics
48V 12V
1104.00 48.00
1104.00 48.00
2208.00 96.00
1152.00 48.00
48V 12V
110.00 1.00
51.00 0.00
0.00 0.00
0.00 0.00
110.00 1.00
51.00 0.00
150.00 1.00
150.00 1.00
55.00 0.00
677.00 4.00
677.00 4.00
1531.00 92.00
show power
175