Enabling And Disabling Web-Based Network Login; Configuring The Base Url; Configuring The Redirect Page - Extreme Networks ExtremeWare XOS Guide Manual

Network Login
Web-Based Network Login Configuration Example on page 365
●
Web-Based Authentication User Login on page 367
●

Enabling and Disabling Web-Based Network Login

To enable web-based network login on the switch, use the following command:
enable netlogin
Any combination of types of authentication can be enabled on the same switch. At least one of the
authentication types must be specified on the CLI.
To disable web-based network login on the switch, use the following command:
disable netlogin
To enable web-based network login on one or more ports, use the following command:
enable netlogin ports
Network Login must be disabled on a port before you can delete a VLAN that contains that port. To
disable web-based network login on one or more ports, use the following command:
disable netlogin ports

Configuring the Base URL

To configure the network login base URL, use the following command:
configure netlogin base-url <url>
Where
<url>
t makes the switch send DNS responses back to the netlogin clients when a DNS query is
access.ne
made for
network-access.net

Configuring the Redirect Page

To configure the network login redirect page, use the following command:
configure netlogin redirect-page <url>
Where
<url>
complete URL starting with
By default, the redirect URL value is "http://www.extremenetworks.com".
This redirection information is used only in case the redirection info is missing from RADIUS server.
For example,
to this URL after they get logged in.
To support https, you must first download and install the separate Extreme Networks SSH software
module (ssh.xmod). This additional module allows you to configure both SSH2 and SSL on the switch.
For more information about SSH2, see
module, see Appendix
364
web-based
web-based
<portlist> web-based
<portlist> dot1x
is the DNS name of the switch. For example,
.
defines the redirection information for the users once logged in. You must configure a
or
http://
configure netlogin base-url http://www.extremenetworks.com
A, "Software Upgrade and Boot
configure netlogin base-url network-
https://
Chapter 16, "Security." For information about installing the SSH
Options."
redirects all users
ExtremeWare XOS 11.3 Concepts Guide