Extreme Networks ExtremeWare XOS Guide Manual page 179

The detail command lists all inline power information for the selected ports. Detail output displays the
following information:
Configured Admin State
●
Inline Power State
●
MIB Detect Status
●
Label
●
Operator Limit
●
PD Class
●
Max Allowed Power
●
Measured Power
●
Line Voltage
●
Current
●
Fault Status
●
Detailed Status
●
Priority
●
Following is sample output from the
Port State Class
3:1 delivering class3
3:2 delivering class3
3:3 searching ------
Following is sample output from the
Port 3:1
Configured Admin State: enabled
Inline Power State
MIB Detect Status
Label
Operator Limit
PD Class
Max Allowed Power
Measured Power
Line Voltage
Current
Fault Status
Detailed Status
Priority
Displaying Port PoE Statistics
Use the following command to display the PoE statistics for each port:
show inline-power stats ports <port_list>
ExtremeWare XOS 11.3 Concepts Guide
show inline-power info port
Volts Curr
(mA)
48.3 192
48.3 192
0.0 0
show inline-power info detail port
: delivering
: delivering
:
: 16800 milliwatts
: class3
: 15.400 W
: 9.400 W
: 48.3 Volts
: 193 mA
: None
:
: low
Displaying PoE Settings and Statistics
command:
Power Fault
(Watts)
9.300 None
9.300 None
0.0 None
command:
179