Hitachi XP P9500 User Manual page 332

Message ID
KAPL05013-I
KAPL05014-I
KAPL05032-I
KAPL05033-W The path health checking for the
8-50
Message Text
The device (aa...aa) for Disk
(bb...bb), Partition (cc...cc) was
removed from the mounted
drive.
The device object (aa...aa) was
registered as the path (bb...bb).
The path health checking for the
path (aa...aa) completed
normally. (bb...bb,cc...cc)
path (aa...aa) failed.
(bb...bb,cc...cc,dd...dd)
Hitachi Dynamic Link Manager User Guide (for Windows(R))
(base-10) number)), partition
(cc...cc: Partition sequence
number (decimal (base-10)
number)), and device object
address (aa...aa: Device object
address (hexadecimal number)) is
the first path for the LU (including
the non-HDLM target device).
Action
None.
Details
The device object corresponding
to the disk (bb...bb: Disk
sequence number (decimal
(base-10) number)), partition
(cc...cc: Partition sequence
number (decimal (base-10)
number)), and device object
address (aa...aa: Device object
address (hexadecimal number)) is
the second or a subsequent path
for the LU.
Action
This is normal. If the target drive
cannot be referenced, check the
disk configuration.
Details
The path (bb...bb: Core logic path
identifier (hexadecimal number))
of the device object (aa...aa:
Filter driver management table
address (hexadecimal number))
was successfully registered into
the core logic.
Action
None.
Details
aa...aa: Path ID (hexadecimal
number)
bb...bb: Disk sequence number
(decimal (base-10) number)
cc...cc: Degree of progress in
health checking (hexadecimal
number)
Action
None.
Details
aa...aa: Path ID (hexadecimal
number)
Messages
Explanation