Checking An Added Path - Hitachi XP P9500 User Manual

Checking an Added Path

You can add a path, by inserting a cable into an existing LU, even while the
host (on which HDLM is installed) is running.
When you add a path without adding an LU, what is displayed in the disk
management window does not changed.
You can confirm that a path has been added by using the HDLM command
view operation, or the HDLM GUI.
that a path has been added on page 4-18
command to confirm that a path has been added. For an example of how to
use the HDLM GUI to confirm that a path has been added, see the HDLM GUI
Help.
Figure 4-2 Using the command to confirm that a path has been added
Note:
¢
¢
4-18
The PathID is determined by the system choosing the smallest,
available number that is not already in use for another path. For
example, when a path is deleted, and then a new path is added, the
PathID for the added path might not be the same number as the
deleted PathID.
When a path not recognized by Windows is added to an LU for the
first time, the following messages might appear:
- KAPL08019-E and KAPL08022-E
- KAPL05301-E
Note that these messages are output by Windows activities, and not
by an error in HDLM.
HDLM Operation
Hitachi Dynamic Link Manager User Guide (for Windows(R))
Figure 4-2 Using the command to confirm
shows an example of using the