Hitachi XP P9500 User Manual page 290

Message ID
KAPL01021-E
KAPL01023-W The last Online path for the
KAPL01024-W The specified parameters cannot
8-8
Message Text
Cannot execute the HDLM
command due to insufficient
memory.
device cannot be placed
Offline(C).
be specified at the same time.
Operation name = aa...aa,
parameters = bb...bb
Hitachi Dynamic Link Manager User Guide (for Windows(R))
¢
Details
Memory required for HDLM
command processing could not be
allocated.
Action
Terminate unnecessary
applications to increase the
amount of free memory, and then
try again.
Details
The path specified for the offline
operation cannot be set to
Offline(C) because it is the last,
available path to the LU from the
host.
Action
Use the view operation of the
HDLM command (dlnkmgr) to
check the status of the paths. For
details on the view operation, see
view (Displays Information) on
page
Details
aa...aa: clear, offline, online,
set, or view
Messages
Explanation
check the settings, and then
retry. For details on the view
operation, see view (Displays
Information) on page 6-29.
view operation
Refer to 3 Creating an HDLM
Environment on page 3-1.
Creating an HDLM
Environment or Reconfiguring
the HDLM Operating
Environment on page 4-16,
and then configure any paths
that exist. If the same
message appears again,
execute the DLMgetras utility
for collecting HDLM error
information, acquire the error
information, and then contact
your HDLM vendor or the
company for which you have
a service contract. For details
on the DLMgetras utility, see
The DLMgetras Utility for
Collecting HDLM Error
Information on page 7-2.
6-29.