The Dlmpr Utility For Clearing Hdlm Persistent Reservations - Hitachi XP P9500 User Manual

#5
The value N depends on the setting in the dlmwebagent.properties file.
The default value is 2.
#6
M.N indicates the version of VxVM, or of Veritas Storage Foundation for
Windows including the VxVM. For example, 5.0 indicates Veritas Storage
Foundation for Windows 5.0.
#7
For Windows Server 2003 (excluding the x86 edition) or Windows Server
2008 (excluding the x86 edition), Program Files is Program Files
(x86).
#8
File names are created by using the value in the Hitachi Network
Objectplaza Trace Library utility's Output (directory and prefix),
adding 2 onto the end, and then adding a file number onto the end of
that. The default file names range from hntr21.log to hntr216.log.
Note that 2 is part of the integrated trace file name and does not
represent part of the file number.
#9
You can obtain dlm_iscsims.txt only when the iSCSI software is
installed.
#10
You can obtain these files only in Windows Server 2003.
#11
You can obtain all files under hbsainfo only when a Hitachi Command
Suite product other than HDLM from which error information is to be
collected is being used.

The dlmpr Utility for Clearing HDLM Persistent Reservations

The dlmpr utility clears the persistent reservation that is left in an LU after
HDLM is uninstalled. However, a persistent reservation is not left in an LU
when you uninstall HDLM as instructed by the procedure in this manual. This
utility is located in the following location:
drive-where-the-installation-DVD-has-been-inserted:\HDLM_Windows
\DLMTools
Note:
This utility can be executed when the following conditions are satisfied:
¢
¢
HDLM has been uninstalled.
Services and drivers in a cluster system have not started yet.
Utility Reference
Hitachi Dynamic Link Manager User Guide (for Windows(R))
7-9