Parameters Used When Displaying Lu Information - Hitachi XP P9500 User Manual

Model names of
storage systems
• Hitachi NSC55
• Hitachi Universal
Storage Platform V
• Hitachi Universal
Storage Platform
VM
Hitachi Virtual Storage
Platform
P9500
HP XP128
HP XP1024
HP XP10000
HP XP12000
HP XP20000
HP XP24000
#
¢
¢

Parameters Used When Displaying LU Information

When displaying LU information, if the -item parameter, -c parameter, or
the -c -item parameter is specified at the same time as the -lu parameter,
you can add and display items and display a summary of LU information. This
section describes each parameter and the LU information and displayed
items.
Parameters to display LU information:
-lu
When neither the -c nor -item parameter is specified with the -lu
parameter, the information about the LU recognized by HDLM is
displayed. The sorting key is iLU and its configuration information is
displayed for each LU.
6-52
Without the -stname parameter
When a summary is displayed by specifying the -path -c parameter
and there are 11 or more characters in the summary string, any
characters after the 9th character are not displayed, and ellipsis (...)
are displayed instead.
For command devices, -CM is added to the end of the emulation type
of the storage system (for example, DF600F-CM).
Command Reference
Hitachi Dynamic Link Manager User Guide (for Windows(R))
Product ID
With the -stname
parameter
(Displays the
following for the
model ID)
USP_V
VSP
P9500
XP128
XP1024
XP10000
XP12000
XP20000
XP24000