Hitachi XP P9500 User Manual page 25
Hitachi dynamic link manager software user guide for windows (6.6) (hit5201-96006, november 2011)
Hide thumbs
Also See for XP P9500:
- User manual (746 pages) ,
- User manual (188 pages) ,
- User manual (640 pages)
Table of Contents
Advertisement
must be installed ahead of time on the host. The cable port on the storage
system is called a port (P) on a channel adapter (CHA) used for iSCSI
connections.
A logical unit (LU), which lies in a storage system, is either an input target or
an output target to or from a host. The areas within an LU are called Devs.
A route that connects a host to a Dev in an LU is called a path.
HDLM assigns a unique ID to each management-target path. This ID is called
AutoPATH_ID. Sometimes, the path is also just simply called a management
target.
Figure 2-2 Configuration of an IP-SAN System When Using an iSCSI HBA on
page 2-5
shows the configuration of an IP-SAN system when using an
iSCSI HBA.
Figure 2-3 Configuration of an IP-SAN System When Using iSCSI
Software and an NIC on page 2-6
shows the configuration of an IP-SAN
system when using the iSCSI software and an NIC.
Figure 2-2 Configuration of an IP-SAN System When Using an iSCSI HBA
2-5
HDLM Functions
Hitachi Dynamic Link Manager User Guide (for Windows(R))
Advertisement
Table of Contents
