Hitachi XP P9500 User Manual page 149

#
To uninstall HDLM, you must reconfigure the system to a single-path
configuration. The time for doing this does not affect the time
required for an uninstallation. Since the uninstallation time depends
on the value of the maximum number of paths that can be configured
in your environment, use this value for an approximate calculation.
• Before uninstalling HDLM 5.5 or later, make sure that no other application
is using an HDLM management-target LU.
• Uninstalling HDLM 05-00 or later also uninstalls Hitachi Network
Objectplaza Trace Library (HNTRLib2). If, however, any program other
than HDLM is using HNTRLib2, only HDLM will be uninstalled. Before
uninstalling HNTRLib2, see the relevant manuals and documentation
provided for each program to check whether any other program is using
it. Uninstall HNTRLib2 only when no programs, other than HDLM, are
using it. For details on uninstalling HNTRLib2, see
Network Objectplaza Trace Library (HNTRLib2) on page
• When uninstalling HDLM on a host where a Device Manager Agent 5.0 or
later is installed, do not execute any of the following Device Manager
Agent commands during uninstallation. Also, do not uninstall HDLM while
executing any of the following Device Manager Agent commands:
hbsasrv, HiScan, hdvmagt_account, hdvmagt_schedule, hldutil, TIC
• If the Data Execute Prevention (DEP) function on the host is enabled,
perform the following procedure:
a Choose Start, Settings, Control Panel, and then double-click
.
System.
The System Properties window is displayed.
b Select the Advanced tab. Click the Settings button under
.
Performance.
The Performance Option window is displayed.
c Select the Data Execution Prevention tab.
.
d Clear the java check box
.
e Click the OK button.
.
The DEP function affects the Java runtime environment used by the
HDLM GUI.
• If you uninstall HDLM while resident software such as an antivirus
program is running, HDLM might not properly uninstall. Before
uninstalling HDLM, make sure that you have stopped any resident
software programs.
• Executing the uninstallhdlm utility for uninstalling HDLM requires 20 KB
of unused capacity in the folder that was specified by the -w parameter
(or the folder specified in the TMP or TEMP environment variable, if the -w
parameter was not specified).
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Windows(R))
Uninstalling Hitachi
3-89.
3-83