Hitachi XP P9500 User Manual page 89

specified in the license key file or the input license key type. For
information on license key types and the set operation, see
the Operating Environment) on page 6-15
• Installing HDLM requires 70 MB of unused capacity on the system drive.
• Terminate all programs that are running before installing HDLM.
• If you select a folder for the HDLM installation folder, and then suddenly
decide to change the folder for the installation folder, the first folder that
you selected might be created along with the actual folder you want to
use for the installation folder. Delete the created folder because a folder
other than the last selected folder is not necessary.
• Depending on the environment, installing HDLM might take a while to
finish. Do not terminate the installation process while a progress bar for
installation is displayed. The following is an approximate calculation of the
time required for installation:
(5 x number-of-connected paths) seconds
• If installation of HDLM terminates abnormally and the KAPL09016-E
message is output, check whether an HDLM version from another OS has
been installed on the same drive.
When an HDLM version from another OS has been installed:
¢
Uninstall the version of HDLM that is already installed, and then rerun
the installation program.
When HDLM for another OS has not been installed:
¢
Perform the installation again by following the procedure below:
a From Explorer, in the Tools menu, choose Folder Options.
.
The Folder Options window is displayed.
b Click the View tab, and in the Advanced settings field, under
.
Hidden files and folders, select Show hidden files and folders.
c Delete the following folder:
.
OS-installation-drive:\Program Files#\InstallShield
\InstallationInformation\
{DFF378A1-240E-11D5-8A43-0000E2382F13}
#
For Windows Server 2003 (excluding the x86 edition) or Windows
Server 2008 (excluding the x86 edition), Program Files is Program
Files (x86).
d Restore the setting for Show hidden files and folders that you
.
changed in step b.
e Rerun the HDLM installation program.
.
• When installing HDLM on a host where a Device Manager agent 5.0 or
later is installed, do not execute any of the following Device Manager
agent commands during the installation of HDLM:
hbsasrv, HiScan, hdvmagt_account, hdvmagt_schedule, hldutil, TIC
• If you want to install only the HDLM Core components, perform an
unattended installation of HDLM. For details about how to perform an
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Windows(R))
set (Sets Up
.
3-23