Number Of Paths Supported In Hdlm; Flow For Creating An Hdlm Environment; Hdlm Installation Types - Hitachi XP P9500 User Manual

Number of Paths Supported in HDLM

Table 3-9 Number of LUs and Paths Supported in HDLM on page 3-13
the number of LUs, the number of paths for an individual LU, and the total
number of paths supported in HDLM.
Number of LUs
Number of paths per LU
Total number of paths

Flow for Creating an HDLM Environment

Set up the environment to use HDLM as follows.

HDLM Installation Types

This section describes the following types of HDLM installations: new
installation, upgrade installation, migration, and re-installation.
New installation of HDLM:
Installing HDLM on a server, which HDLM has never been installed on, is
called a new installation of HDLM.
Upgrade installation of HDLM:
Installing a newer version of HDLM over the existing version without
uninstalling the existing version is called an upgrade installation of
HDLM.You can perform an upgrade installation for only HDLM 5.5 or later.
Migration of HDLM:
Table 3-9 Number of LUs and Paths Supported in HDLM
Item
Figure 3-1 Flow of HDLM Environment Setup
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Windows(R))
Number supported
1 to 256
1 to 12
1 to 3060
lists
3-13