To Display The Format Of The Offline Operation - Hitachi XP P9500 User Manual

-s
Executes the command without displaying the message asking for
confirmation of command execution from the user. Specify this parameter
if you want to skip the response to the confirmation message: for
example, when you want to execute the command in a shell script or
batch file.
Example

To Display the Format of the Offline Operation

-help
Displays the format of the offline operation.
Example
Reference
Using the view operation together with Windows commands enables you to
filter the path information listed for a specific HBA port or channel adapter
port. For details about the view operation, see
page 6-29.
when the path is placed in the Offline(C) status, enter y.
Otherwise, enter n. [y/n]: y
KAPL01061-I 1 path(s) were successfully placed Offline(C); 0
path(s) were not. Operation name = offline
The following example shows how to place a path, whose
AutoPATH_ID is 000001, offline without asking for confirmation of
command execution from the user:
>dlnkmgr offline -pathid 1 -s
KAPL01061-I 1 path(s) were successfully placed Offline(C); 0
path(s) were not. Operation name = offline
>
The following example shows how to display the format of the
offline operation:
>dlnkmgr offline -help
offline:
Format
dlnkmgr offline [-path] -hba HBAPortNumber.BusNumber [-s]
dlnkmgr offline [-path] -cha -pathid AutoPATH_ID [-s]
dlnkmgr offline [-path] -pathid AutoPATH_ID [-s]
dlnkmgr offline [-path] -hbaportwwn HBA_Port_WWN
Valid value
AutoPATH_ID
Host_LUN
KAPL01001-I The HDLM command completed normally. Operation
name = offline, completion time = yyyy/mm/dd hh:mm:ss
>
Command Reference
Hitachi Dynamic Link Manager User Guide (for Windows(R))
[-tid Target_ID -hlun Host_LUN] [-s]
{ 000000 - 999999 }(Decimal)
{ 0000 - FFFF }(Hexadecimal)
view (Displays Information) on
6-9