Hitachi XP P9500 User Manual page 126

The license key file will be deleted after the installation finishes.
5 Perform the installation.
.
¢
¢
6 Specify a license key file or enter the license key by following the
.
instructions shown in the messages that appear in the window.
¢
¢
7 Specify the installation folder by following the instructions shown in the
.
messages that appear in the window.
The utility for registering HDLM persistent reservation keys (dlmprsvkey)
will be automatically executed. However, creation of the PRSV key might
be unsuccessful if, for example, an NIC does not exist. If the PRSV key is
created with time information only, or if key creation fails, a dialog box
will prompt you to enter the PRSV key.
If this dialog box appears, go to step 8; otherwise, go to step 9.
8 Enter the PRSV key by following the instructions shown in the dialog box.
.
The PRSV key is required for the HDLM functions to properly operate.
Also, the value of the PRSV key must be unique for each host.
If the KAPL09128-W message appears, you will need to re-enter the
correct PRSV key.
9 Follow the instructions shown in the messages that appear in the window.
.
¢
3-60
If you are not performing an unattended installation, insert the DVD
into the drive.
In the displayed window, click the Install button next to for
Windows of Hitachi Dynamic Link Manager Software.
If no window is displayed, manually run the installer (setup.exe).
The program checks whether HDLM has already been installed. If the
KAPL09173-W message will appear, perform the procedure shown in
Upgrade Installation or Re-installation of HDLM on page
If a message does not appear, go to the next step.
If you are planning to perform an unattended installation, execute the
installhdlm utility.
drive-containing-the-inserted-installation-DVD:\HDLM_Windows
\DLMTools\installhdlm -f installation-information-settings-
file
Specify n for the restart key in the installation-information settings
file.
This command checks whether HDLM has already been installed. If
the KAPL09183-I message will appear, the re-installation is
performed.
After the installation is complete, go to step 10.
If a license key file was saved in step 4, specify that license key file.
If a license key file is not being used, specify the license key directly.
The PRSV key will be registered before the installation finishes. If the
KAPL09131-W message appears, follow the procedure described in
step 11.
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Windows(R))
3-63.