Hitachi XP P9500 User Manual page 298

Message ID
KAPL01063-I
KAPL01064-W The information for the specified
KAPL01065-E
8-16
Message Text
The target path(s) are already
aa...aa.
host device could not be
acquired. Operation name =
aa...aa
The configuration does not
support the simultaneous use of
the load balancing and cluster
support functions.
Hitachi Dynamic Link Manager User Guide (for Windows(R))
Details
As a result of a previous online/
offline operation, the specified
path has already been set to
Online/Offline(C).
aa...aa: Online or Offline(C)
Action
Use the view operation of the
HDLM command (dlnkmgr) to
check the status of the path. For
details on the view operation, see
view (Displays Information) on
page
online operation, see
(Places Paths Online) on page
6-10. For details on the offline
operation, see
Paths Offline) on page
Details
The host device specified in view
-path -hdev cannot currently be
accessed.
aa...aa: view
Action
¢
¢
¢
Details
If a storage system for which
persistent reservations are not
supported exists among the
HDLM-managed storage systems,
the load balancing function cannot
Messages
Explanation
6-29. For details on the
online
offline (Places
6-6.
If the specified host device is
being formatted, retry after
the formatting finishes.
If all the paths to the
specified host device contain
an error, recover them from
the path errors, and then
retry.
In a cluster configuration, if
the LU existing for the
specified host device is
exclusively used by another
host, or if the specified host
device is allocated to a
dynamic disk volume, you
cannot view the path
information by specifying the
host device name. Re-execute
the dlnkmgr command's view
operation without specifying
the host device name.