To Display The Format Of The Set Operation - Hitachi XP P9500 User Manual

Value (severity)
1
2
3
4
5
6
7
-category [[ss][a][ca]|all]
Specifies the categories of audit log data to be collected.
Indicating Audit Log Data Categories on page 6-28
indicate categories of audit log data. The default is all. Note that if you
enter -category without specifying any category (ss, a, ca, or all), it is
assumed that all is specified.
ss
a
ca
all
-s
Executes the command without displaying the message asking for
confirmation of command execution from the user. Specify this parameter
if you want to skip the response to the confirmation message: for
example, when you want to execute the command in a shell script or
batch file.

To Display the Format of the Set Operation

-help
Displays the format of the set operation.
Example
>dlnkmgr set -help
set:
Format
6-28
Error-level and Warning-level audit log data is collected.
Error-level, Warning-level, and Information-level audit log data is
collected.
Table 6-9 Values Indicating Audit Log Data Categories
Value
Audit log events of the StartStop category are collected.
Audit log events of the Authentication category are collected.
Audit log events of the ConfigurationAccess category are
collected.
Audit log events of the StartStop, Authentication, and
ConfigurationAccess categories are collected.
The following example shows how to display the format of the set
operation:
Command Reference
Hitachi Dynamic Link Manager User Guide (for Windows(R))
Explanation
Table 6-9 Values
lists the values that
Explanation