Hitachi XP P9500 User Manual page 95

drive-to-which-the-installation-DVD-is-inserted:\HDLM_Windows
\DLMTools\installhdlm -f installation-information-settings-
file
This command checks whether HDLM has already been installed. If
HDLM 5.4 or earlier has been installed, the KAPL09129-E message will
appear. If this happens, carry out the procedure shown in
from HDLM 5.4 or Earlier to HDLM 5.5 or Later on page
HDLM 5.5 or later has been installed, the KAPL09183-E message will
appear, and then the upgrade installation or re-installation will be
performed.
If you have specified n for the restart key in the installation-
information settings file, go to step 11.
If you have specified y for the restart key in the installation-
information settings file, go to step 16.
4 The program checks the MPIO driver version, and then installs the MPIO
.
driver. If a message appears, asking you whether you want to install the
MPIO driver, make sure that no multi-path management software other
than HDLM is installed.
If multi-path management software other than HDLM is installed, click
¢
the Cancel button to cancel the installation, uninstall the multi-path
management software, and then install HDLM.
If no multi-path management software other than HDLM is installed,
¢
click the Next button to continue the installation.
5 Follow the instructions shown in the messages that appear in the window.
.
If a license key file was saved in step 2, specify that license key file.
¢
If a license key file is not being used, specify the license key directly.
¢
6 Specify the installation folder by following the instructions shown in the
.
messages that appear in the window.
The utility for registering HDLM persistent reservation keys (dlmprsvkey)
will be automatically executed. However, creation of the PRSV key might
be unsuccessful if, for example, an NIC does not exist. If the PRSV key is
created with time information only, or if key creation fails, a dialog box
will prompt you to enter a PRSV key.
If this dialog box appears, go to step 7; otherwise, go to step 9.
7 Enter the PRSV key by following the instructions shown in the dialog box.
.
The PRSV key is required for the HDLM functions to properly operate.
Also, the value of the PRSV key must be unique for each host.
8 If the KAPL09128-W message appears, you will need to re-enter a correct
.
PRSV key.
If a message does not appear, go to the next step.
9 Select an HDLM management-target device only when the OS is one of
.
the following:
Windows Server 2003 (x86) SP1 or later
¢
Windows Server 2003 (IPF) SP1 or later
¢
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Windows(R))
Migrating
3-64. If
3-29