When Oracle Rac Is Used - Hitachi XP P9500 User Manual
Hitachi dynamic link manager software user guide for windows (6.6) (hit5201-96006, november 2011)
Hide thumbs
Also See for XP P9500:
- User manual (746 pages) ,
- User manual (574 pages) ,
- User manual (640 pages)
Table of Contents
Advertisement
HDLM Driver Ver
Alive
License Type Expiration
Permanent
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
Even if you are using VCS, off appears for Support Cluster. Even if this
is the case, the cluster support function will run properly.
22
Use the results of the view operation to check the version of the installed
.
HDLM.
If x.x.x-xx is displayed in HDLM Version, the correct version of HDLM
has been installed.
23
Use the results of the view operation to check that the programs are
.
running properly.
If HDLM Manager, HDLM Alert Driver, and HDLM Driver are all Alive,
all the programs are running correctly.
24
After the installation finishes, check the path information as described in
.
Checking the Path Configuration on page
have successfully installed HDLM in a single-path configuration.
25
Connect cables to all the HBAs to change the configuration to a multi-path
.
configuration.
26
Check the path information as described in
.
Configuration on page 3-68
assembled a multi-path configuration.
When Oracle RAC Is Used
To install HDLM when Oracle RAC is used:
1
Shut down all the hosts.
.
2
Make sure that all the hosts that make up the cluster system have been
.
fully shut down.
3
Restart each host.
.
Start them in a single-path configuration.
4
Log on to Windows as a member of the Administrators group.
.
5
Save the license key file directly under the Windows installation-
.
destination drive. Also, instead of using the license key, you can directly
specify the license key during the installation of HDLM.
installation-drive:\hdlm_license
The license key file will be deleted after the installation finishes.
6
Perform the installation.
.
¢
3-46
x.x.x-xx
-
If you are not performing an unattended installation, insert the DVD
into the drive.
In the displayed window, click the Install button next to for
Windows of Hitachi Dynamic Link Manager Software.
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Windows(R))
WakeupTime
yyyy/mm/dd hh:mm:ss
3-68, and make sure that you
Checking the Path
to make sure that you have successfully
Advertisement
Table of Contents
