Hitachi XP P9500 User Manual page 325

Message ID
KAPL04010-E Could not open the error log file. Details
KAPL04011-E Could not output the error log
file.
KAPL04012-E Could not create a
communication pipe. RC =
aa...aa
KAPL04013-E Input is impossible via the
communication pipe. RC =
aa...aa
Hitachi Dynamic Link Manager User Guide (for Windows(R))
Message Text
Messages
Explanation
If the same error occurs, re-install
HDLM. For details on the view
operation, see view (Displays
Information) on page
details on the set operation, see
set (Sets Up the Operating
Environment) on page
HDLM manager could not start
normally because it was unable to
open the error log file.
Action
Check whether another program is
currently using the error log file
(for example, the file is being
opened in a text editor), or
whether the error log file has been
inadvertently deleted.
Details
The log information could not be
output to the error log file.
Action
Make sure that the disk has
enough unused capacity.
Details
HDLM manager could not start
normally because it was unable to
create a pipe file, which is used in
communication with HDLM
commands.
aa...aa: OS error code (decimal
(base-10) number)
Action
Execute the DLMgetras utility for
collecting HDLM error information,
and then contact your HDLM
vendor or the maintenance
company if there is a maintenance
contract for HDLM. For details on
the DLMgetras utility, see
DLMgetras Utility for Collecting
HDLM Error Information on page
7-2.
Details
Data could not be read from the
pipe file while communicating with
an HDLM command.
aa...aa: OS error code (decimal
(base-10) number)
Action
6-29. For
6-15.
The
8-43