Hitachi XP P9500 User Manual page 84

¢
This error does not affect the data on the HDLM management-target
devices. If you restart the host and then activate the disk in the Disk
Management window of Windows, this error will not appear. To prevent
this error from occurring, perform the following before installing HDLM:
¢
¢
• In Windows Server 2003 (excluding IPF versions) and Windows Server
2008 (excluding IPF versions), boot disk environments that use the GUID
Partition Table (GPT) are not supported.
• In Windows Server 2003 (excluding x86 versions) and Windows Server
2008 (excluding x86 versions), we recommend that you install HDLM in a
folder other than Program Files.
• When installing HDLM, the name of the HDLM installation folder and the
names of all its parent folders must satisfy all of the following conditions:
¢
¢
¢
¢
If you attempt to install HDLM in a folder that does not satisfy these
conditions, problems such as those described in
What to Do When Specifying a Folder That Does Not Satisfy the
Conditions for an HDLM Installation on page 3-18
happens, reinstall HDLM by following the procedures given below.
Table 3-10 Problems and What to Do When Specifying a Folder That
An internal error occurred and the
installation was interrupted.
After the installation has finished, the
error information could not be collected
when the DLMgetras utility for collecting
HDLM error information was executed.
• When installing HDLM in Windows Server 2008, perform the following
operation before the installation to make sure applications cannot access
the HDLM management-target disks.
3-18
An application that uses the dmaadmin service is being executed.
When a mirror disk volume that uses a dynamic disk exists among the
HDLM management-target devices
Close the management console for the disk.
When the application that uses the dmaadmin service is being
executed
Stop the application that uses the dmaadmin service.
The name must not be a reserved name specified in Windows.
Reserved names include names like CON, AUX, COM1 to COM9, LPT1 to
LPT9, PRN, and NUL.
The name must be made by using only the following characters:
A - Z, a - z, 0 - 9, -, _, ., @, or a single byte space
The last character cannot be a single byte space.
The name cannot contain two or more single byte spaces in a row.
Does Not Satisfy the Conditions for an HDLM Installation
Problem
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Windows(R))
Table 3-10 Problems and
might occur. If this
What to do
Specify a folder that satisfies the above
conditions and re-install the HDLM.
Uninstall HDLM, and then re-install it by
specifying a folder that satisfies the
above conditions.