Hitachi XP P9500 User Manual page 380

Message ID
KAPL12401-I
KAPL12402-W iLU (aa...aa) is in a multi-path
KAPL12403-W A necessary parameter has not
KAPL12404-W A parameter is invalid.
KAPL12405-E
8-98
Message Text
All LUs managed by HDLM are in
a single path configuration.
configuration. PathID =
bb...bb[,cc...cc]...
been specified.
Parameter = aa...aa
Cannot execute the utility for
checking HDLM paths due to
insufficient memory.
Hitachi Dynamic Link Manager User Guide (for Windows(R))
vendor or the maintenance
company if there is a maintenance
contract for HDLM.
If the WMI repository is corrupted,
consider rebuilding the repository.
Details
This message is displayed when
the number of LUs managed by
HDLM is 0.
Action
None.
Details
The LU for the LU number in the
message is not in a single path
configuration.
aa...aa: LU number
bb...bb,cc...cc: Path ID of the
path connected to the LU
Action
Before performing uninstallation,
upgrade installation, or re-
installation, change all the LUs to
a single path configuration.
Action
Execute the dlmchkpath utility for
checking HDLM paths with the -h
parameter to check the
parameter, and then retry. For
details on the dlmchkpath utility,
see
Checking HDLM Paths on page
7-13.
Details
aa...aa: Specified parameter
Action
Execute the dlmchkpath utility for
checking HDLM paths with the -h
parameter to check the
parameter, and then retry. For
details on the dlmchkpath utility,
see
Checking HDLM Paths on page
7-13.
Details
Not enough memory could be
allocated for the dlmchkpath
utility for checking HDLM paths.
Action
Messages
Explanation
The dlmchkpath Utility for
The dlmchkpath Utility for