Hitachi XP P9500 User Manual page 213

Setting
Available operation
AFB IEM
Set AFB to on.
off
Set AFB to off.
Legend:
AFB: Automatic failback
IEM: Intermittent error monitoring
#1
When this condition is not satisfied, the KAPL01080-W message is output
and an error occurs. The status of intermittent error monitoring does not
change.
#2
Because automatic failback is off, intermittent error monitoring is
disabled.
Example
The following example shows how to enable monitoring of intermittent
errors:
>dlnkmgr set -iem on -intvl 20 -iemnum 2
KAPL01049-I Would you like to execute the operation?
Operation name = set [y/n]: y
KAPL01001-I The HDLM command completed normally. Operation
name = set, completion time = yyyy/mm/dd hh:mm:ss
>
-lic
Specify this option for when a license is updated. The HDLM license is
provided via a license key or license key file. A license key file is a file
that stores the HDLM license key.
If you use a license key file:
Store the license key file named hdlm_license directly under the
Windows installation drive, and then execute the set -lic operation.
A message confirming that the license key has been registered is
displayed, depending on the license key type defined in the license
key file. When a temporary license key or emergency license key has
been registered, the expiration period is displayed (KAPL01071-I,
KAPL01072-I).
If you do not use a license key file:
When the set -lic operation is executed, a message (KAPL01068-I)
asking the user to enter a license key appears. Enter the license key.
A message confirming that the license key has been registered is
displayed, depending on the license key type described in the license
Hitachi Dynamic Link Manager User Guide (for Windows(R))
AFB is enabled.
The operations of AFB and IEM do not
change.
Command Reference
Result of operation
6-25