Hitachi XP P9500 User Manual page 96

¢
#
The Hitachi storage systems and HP StorageWorks XP Series option
is always selected. To select an EMC DMX series or EMC CX series LU as
the HDLM management-target device, select EMC Symmetrix DMX
Series, CLARiiON CX Series. To select an HP EVA series LU as the
HDLM management-target device, select HP StorageWorks EVA Series.
10 Follow the instructions shown in the messages that appear in the window.
.
¢
¢
¢
¢
11 Check the results of the installation.
.
If you have performed an unattended installation, check the installation
results from the command prompt.
12 After the installation finishes, execute the dlmprsvkey utility with the -v
.
parameter specified.
Execute the following command:
HDLM-installation-folder\bin\dlmprsvkey -v
3-30
Windows Server 2003 (x64)
This OS cannot be used with the EMC DMX series.
If a dialog box with the following text appears during installation, and
the Storport Miniport driver is being used as the HBA driver, stop the
HDLM installation. After that, install QFE838894 or a later version of
the Microsoft Storport driver, or install Windows Server 2003 SP1 or
later.
Notes on using a Storport Miniport driver
Read these notes before using a Storport Miniport driver as an
HBA driver.
The file version of the Storport.sys of this system
(Microsoft(R) Storport driver) is n.n.nnnn.n.
When using a Storport Miniport driver as an HBA driver:
Please update the Storport Miniport driver to a Storport.sys
with a file version n.n.nnnn.n or later.
The PRSV key will be registered before the installation finishes. If the
KAPL09131-W message appears, follow the procedure described in
step 12.
Although a message prompting you to restart the host appears after
the installation has finished, a restart is not necessary.
In the last installation window, the following message might be
output:
When you manage a host by using Global Link Manager and
Windows firewall is enabled on that host, execute the
firewall_setup command to allow a firewall exception.
If Global Link Manager will not be used to manage HDLM, you do not
need to take any action.
To manage HDLM with Global Link Manager, register Firewall
exceptions. For details, see
Using Global Link Manager on page
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Windows(R))
#
Firewall Settings for Managing HDLM by
3-66.