Hitachi XP P9500 User Manual page 333

Message ID
KAPL05034-I Disk(aa...aa) is a target disk
system for HDLM.
(bb...bb,cc...cc)
KAPL05301-E A path has been removed. Make
sure that the path is correctly
connected to the LU, and then
recover the path. If the path
cannot be recovered, execute
the DLMgetras utility to collect
error information, and then
contact your vendor or
maintenance company. Refer to
the HDLM User's Guide for
instructions how to execute the
DLMgetras utility.
Hitachi Dynamic Link Manager User Guide (for Windows(R))
Message Text
Messages
Explanation
bb...bb: Disk sequence number
(decimal (base-10) number)
cc...cc: Degree of progress in disk
recognition processing
(hexadecimal number)
dd...dd: Execution result of health
checking (hexadecimal number)
Action
Check the path for which path
health checking failed. If this
message is displayed for an
unexpected path, contact your
HDLM vendor or the maintenance
company if there is a maintenance
contract for HDLM.
Details
The disk is a CoreLogic
management-target disk.
aa...aa: Disk sequence number
(decimal (base-10) number)
bb...bb: Degree of progress in
disk recognition processing
(hexadecimal number)
cc...cc: Execution result of the
disk confirmation command
(hexadecimal number)
Action
None.
Details
When the LU deletion function is
enabled, path information is
output to the event log. Removed
path information is displayed in
the event viewer with the
following format:
PathID PathName DskName iLU
ChaPort
When a path is added to an LU,
this message might appear. Note
that this message is output by
Windows activities, and not as a
result of an error.
Action
Make sure that the path is
correctly connected to the LU, and
then recover the path. If the path
cannot be recovered, contact your
HDLM vendor or the maintenance
company if there is a maintenance
contract for HDLM.
8-51