Automatic Switching Of Paths That Have The Online(E), Offline(C), Or Offline(E) Status - Hitachi XP P9500 User Manual
Hitachi dynamic link manager software user guide for windows (6.6) (hit5201-96006, november 2011)
Hide thumbs
Also See for XP P9500:
- User manual (746 pages) ,
- User manual (188 pages) ,
- User manual (450 pages)
Table of Contents
Advertisement
•
An LU has been removed from being an HDLM management-target
Automatic Switching of Paths That Have the Online(E), Offline(C), or
Offline(E) Status
In HDLM 5.5 or later, if one of the following conditions is satisfied, the status
of Online(E), Offline(C), or Offline(E) paths will automatically change to
Online. In HDLM 5.4 or earlier, even if one of the following conditions is
satisfied, the path status will not automatically change to Online:
•
Online(E) paths
If one of the following conditions is satisfied, Online(E) paths will
automatically change to Online.
¢
¢
•
Offline(C) paths
When all of the following conditions are satisfied, the connected
Offline(C) paths are automatically placed Online:
¢
¢
¢
•
Offline(E) paths, where intermittent errors are thought to have
occurred
When the following conditions are satisfied, the connected Offline(E)
paths are automatically placed Online:
¢
¢
•
Offline(E) paths, where intermittent errors are not thought to have
occurred
If one of the following conditions is satisfied, Online(E) paths will
automatically change to Online.
¢
¢
A path that was disconnected and was free from any I/O errors has
been recovered
An LU was removed from being an HDLM management-target, and
then the same LU is re-added as an HDLM management-target
All the online paths are Online(E) and the SCSI devices connected to
the Online(E) paths have been deleted.
SCSI devices are connected and all the Offline(E) paths are subject
to automatic failbacks.
SCSI devices are connected to the Offline(C) paths.
All the online paths are Online(E) and the SCSI devices connected to
the Online(E) paths have been deleted.
The SCSI devices are connected to the Offline(E) paths.
A path that was disconnected and was free from any I/O errors has
been recovered
An LU was removed from being an HDLM management-target, and
then the same LU is re-added as an HDLM management-target
Functional Differences Between Versions of HDLM
Hitachi Dynamic Link Manager User Guide (for Windows(R))
A-5
Advertisement
Table of Contents
