Hitachi XP P9500 User Manual page 53

A system memory dump file is a file to which the system memory data is
output when a Windows system is down. Specify the following procedure to
output the system memory dump file.
Click Control Panel, System, Startup/Shutdown, Write Debugging
Information is chosen with Recovery, and then choose Kernel Memory
Dump or Complete Memory Dump.
Table 2-7 Types of Error Information on page 2-33
error information.
Table 2-7 Types of Error Information
Log name
Integrated trace Operation logs for the HDLM
file commands and HDLM GUI
Trace file Trace information on the HDLM
manager is collected at the level
specified by the user. If an error
occurs, you might need to change
the settings to collect trace
information.
Error log Error information is collected for the
user-defined level. By default,
HDLM collects all error information.
Event log Information about very severe
errors (a severity level of Critical
or Error) is collected.
You can use administrative tools
such as Event Viewer to check these
event logs.
Hitachi Dynamic Link Manager User Guide (for Windows(R))
Description
HDLM Functions
describes the types of
Output destination
The default file path is drive-for-
program-installation:\Program
#1
Files \HITACHI
\HNTRLib2\spool\hntr2n.log
(n indicates a file number)
To specify the output destination
folder and the file prefix for the
integrated trace file, use a
Hitachi Network Objectplaza
Trace Library (HNTRLib2) utility.
The trace file name is \Program
Files\HITACHI
\DynamicLinkManager\log
#2
\hdlmtr[1-64].log
HDLM Manager logs:
\Program Files\HITACHI
\DynamicLinkManager\log
\dlmmgr[1-16].log
HDLM GUI logs:
\Program Files\HITACHI
\DynamicLinkManager\log
#2
\dlmgui[1-2].log
Hitachi Command Suite Common
Agent Component logs:
\Program Files\HITACHI
\DynamicLinkManager\log
\dlmwebagent[1-n].log
The value n depends on a
setting in the file
dlmwebagent.properties.
Event log (application log)
#2
#2
2-33